Lathe Machines
Leading Manufacturer of lathe machine for sugar mills, light duty lathe machines, geared head extra heavy duty lathe machine, 7 feet all geared heavy duty lathe machine, roll turning lathe machines and all geared medium duty lathe machine from Rajkot.Lathe Machine For Sugar Mills
Product Details:
| Automation Grade | Automatic |
| Max Swing Over Bed | 2000 mm |
| Bed Material | Cast Iron (Grade 25) |
| Hardness (BHN) | 180 |
| Brand | Accumax |
| Type | Lathe Machine |
| Chuck Diameter | 2100 mm |
| Spindle Diameter | 400 mm |
Lathe Machine for Sugar Mills is used in cutting, knurling, and sanding. We provide wide range lathe machines to our valuable customer.
Other Details:
- Bed is made from cast iron of good hardness, strictly inspected with micro level, hardness tester, and straight edge.
- Boring of head stock is done on WMW boring machine fitted with induction hardened and ground spindle made from alloy steel.
Standard Accessories:
- Change gear set (Inch & mm)
- Chuck Plate
- Tool Post Key
- Centre Adaptor
Extra Accessories:
- Electric Motor & V - Belt with Electrical
- Coolant pump, tank, and nozzle
- Quick change tool Post / Rear tool postTaper Turning Attachment
Special Requirement:
- V-belt or flat belt pulleys
- Norton gear box (Single Screw / Double Screw)
- Any Special Requirement as per customers drawing.
Callback
Light Duty Lathe Machines
Product Details:
| Length Of Bed | 1370 mm |
| Height of Centre | 165 mm |
| Brand | Accumax |
| Material | ss |
| Automatic Grade | Semi-Automatic |
| Admit between | 725 mm |
| Carriage size | 375 mm X 400 mm |
| Compound slide swivelling Degree | 45-0-45 |
| Cross slide size | 175 mm X 400 mm |
| Cross slide trave | 235 mm |
| Hole through the spindle | 40 mm |
| Inches Threads | 4 to 24 T.P.I. |
| Lead Screw Diameter | 25.4 mm |
| Lead Screw Threads | 4 T.P.I. |
| Metric Threads | 1 to 6 mm |
| Sleeve Dia | 38 mm |
| Sleeve Travel | 125 mm |
| Spindle nose Size | 6 T.P.I. |
| Spindle speeds | 8 |
| Swing in gap | 500 mm |
| Swing over bed | 315 mm |
| Swing over slide | 190 mm |
| Taper bore in spindle | M.T. - 5 |
| Taper born in sleeve | M.T. - 3 |
| Top slide travel | 125 mm |
| Type | Lathe Machine |
| Width of bed | 235 mm |
Our range of Light Duty Lathe Machines is manufactured from a quality-tested raw material. These lathes can satisfy the various turning requirements of a very wide range of different Industries offering an affordable solution to higher machining accuracy and better surface finish. We also meet customized requirement for our client's benefit.
Applications-
- Automobile
- Electronic
- Electrical
Callback
Geared Head Extra Heavy Duty Lathe Machine
Product Details:
| Height of Centre | 508 mm |
| Swing Over Bed | 965 mm |
| Number of Spindle Speeds | 8 |
| Machine Type | All Geared Extra Heavy Duty Lathe Machine |
| Swing Over Cross Slide | 700 mm |
| Spindle Speed Range | 30-500 RPM |
| Lead Screw Diameter | 50 mm |
| Cross Slide Travel | 600 mm |
| Condition | New |
| Country of Origin | Made in India |
We are the leading manufacturer of Accumax Extra Heavy Duty Lathe Machine. which are available in different specifications and dimensions. These lathe machines are used in different industries and can also be customized as customer requirement.
We present lathe machines for heavy duty operations which are preferably used in heavy duty industrial applications as well as precise machining applications like Automobile, electrical, electronic, etc. This tool is designed with the most qualified features that provide consistency in long term production requirement.
Standard Accessories:
- Chuck Plate
- Motor Pulley
- Tool Post Key
- Dead Centers -2 Nos.
- Center Adopter
- Change Gear - B.S.W-13
- Change Gear - M.M.-3
Callback
7 Feet All Geared Heavy Duty Lathe Machine
Product Details:
| Bed Length | 7 Feet |
| Height of Centre | 254 mm |
| Swing Over Bed | 500 mm |
| Number of Spindle Speeds | 12 |
| Machine Type | All Geared Heavy Duty Lathe Machine |
| Distance Between Centre | 1000 mm |
| Bed Width | 315 mm |
| Swing Over Cross Slide | 280 mm |
| Maximum Swing in Gap | 760 mm |
| Spindle Speed Range | 35-1100 RPM |
| Lead Screw Diameter | 38 mm |
| Main Motor | 8 HP |
| Condition | New |
| Country of Origin | Made in India |
| Lead Screw Pitch | 4 T.P.I |
| Tail Stock Spindle Diameter | 60 mm |
| Tail Stock Spindle Travel | 200 mm |
| Range of Metric Thread | 1-7 mm |
| Spindle Nose | 6 T.P.I |
| Taper in Spindle Sleeve | MT-6 |
| Type of Spindle Nose | A2-6 |
Heavy Duty Lathe Machines are one of the most extensively utilised lathe machines because of its high quality and rapid rate of output. These are made of high-quality iron and steel and are built to withstand the most difficult shaping chores. It is used in a variety of industries, including power plants, steel plants, oil and mining industries, shipbuilding factories, repair shops, and paper textiles, for metal spinning, metal working, wood turning, and metal fabricating. They are particularly well suited to high-volume production because to their high-performance capacity to work at fast speeds.
Our range of All geared Heavy Duty Lathe Machine is manufactured from quality-tested raw material. These Lathe Machine finds applications in various automobile, electronic, electrical industries to name a few. We also meet customized requirement for our clients benefit.
Features:
- High tensile strength
- Dimensionally accurate
- Corrosive resistant
- Abrasion resistant
Callback
Roll Turning Lathe Machines
Product Details:
| Model | TMT - 18 |
| Length of Bed (mm) | 3000 to 12500 |
| Tail stock sleeve travel (mm) | 250 |
| Tail stock ram dia. (mm) | 75 |
| Cross slide travel (mm) | 450 |
| Main motor H.P / R.P.M | 5 / 1440 |
| Brand | Accumax |
| Type | Lathe Machine |
| Admit between center (mm) | 1750 to 11300 |
| Height of center (mm) | 450 |
| Bed width (mm) | 450 |
| Swing over bed (mm) | 900 |
| Swing over cross slide (mm) | 600 |
| Swing over gap (mm) | 1200 |
| Spindle bore (mm) | 100 |
| Spindle (R.P.M) | 25 to 600 |
We provide precision engineered range of Roll Turning Lathe Machines. These Roll Turning Lathe Machines are manufactured from highest grades of material like iron and steel and are available in customized specifications for our clients benefit.
Specifications:
No. | Specifications |
| TMT - 24 | TMT - 30 |
1 | Length of Bed (mm) |
| 3000 to 12500 | 3000 to 12500 |
2 | Admit between center (mm) |
| 1500 to 10800 | 1000 to 11400 |
3 | Height of center (mm) |
| 600 | 750 |
4 | Bed width (mm) |
| 600 | 750 |
5 | Swing over bed (mm) |
| 1200 | 1500 |
6 | Swing over cross slide (mm) |
| 850 | 1150 |
7 | Swing over gap (mm) |
| 1500 | 2050 |
8 | Spindle bore (mm) |
| 100 | 125 |
9 | Spindle R.P.M. |
| 20 to 400 | 15 to 300 |
10 | Spindle speed Nose/range |
|
|
|
11 | Tail stock sleeve travel (mm) |
| 300 | 300 |
12 | Tail stock ram dia. (mm) |
| 100 | 100 |
13 | Cross slide travel (mm) |
| 600 | 750 |
14 | Main motor H.P./R.P.M. |
| 7.5 / 960 | 10 /720 |
15 | Taper in Tailstock RAM |
| MT - 6 | MT – 6 |
16 | Lead screw dia./threads (TPI) |
| 50/2 | 50/2 |
Callback
All Geared Medium Duty Lathe Machine
Product Details:
| Model | MD 215 |
| Brand/Make | ACCUMAX |
| Length Of Bed | 6 feet |
| Type of Bed | Pedestal |
| Height of Centre | 215mm |
| Automatic Grade | Semi-Automatic |
| Layout | Horizontal |
| Max Swing Over Bed | 430 mm |
| Spindle Bore (mm) | 52mm |
| Spindle Speed (rpm) | 45-1200 |
| Cross Slide (mm) | 240 |
| Lead Screw Diameter Or Pitch | 32mm |
| Range Of Longitudinal Feeds | 0.08 to 1mm |
| Range Of Transverse Feeds | 0.02 to 0.25 |
| Spindle Threads | 6 tpi |
| Suitable Electrical Hp | 2 hp |
| Tail Stock Sleeve Travel | 150 |
| Taper In Spindle Sleeve | MT-4 |
| Type | Lathe Machine |
| Work Type | Medium Duty |
| Height Of Center | 212 mm |
| Width Of Bed | 280 mm |
| Spindle Bore | 52 mm |
| Power Required | 2 HP |
| Max Swing Over Side | 240 mm |
We are manufacturer and exporter of All Geared Medium Duty Lathe Machine. These all geared medium duty lathe machines are made from the high-grade material. We offer these on market leading prices, high quality, and durability.
Features-
- Boring of the headstock is done on WMW boring machine fitted with induction hardened and ground spindle made from alloy steel.
- An apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
- Hexagonal shaped tailstock with hardened and ground tailstock spindle made from alloy steel having external and internal grinding
Model | MD 212H |
Height Of Center (mm) | 250 |
Width Of Bed (mm) | 280 |
Max.Swing Over Bed (mm) | 490 |
Max.Swing Over Side (mm) | 320 |
Spindle Bore (mm) | 80 |
Spindle Nose | 6TPI |
Spindle Speed - 6 (R.P.M) | 40 -550 |
Cross Side | 240 |
Lead Screw TPI | 4 TPI |
Tail Strock Sleeve | MT-4 |
Power Required (HP) | 2 |
Callback
Medium Duty Lathe Machine
Product Details:
| Automatic Grade | Semi-Automatic |
| Length Of Bed | 1370 mm |
| Height of Centre | 6 Ft |
| Spindle Nose | 6 T.P.I. |
| Brand | Accumax |
| Type | Lathe Machine |
| Bed Material | Cast Iron (25 Grade) |
| Hardness (BHN) | 180 |
| Height of center | 215 mm |
| Cross Slide Size | 175 mm X 400 mm |
| Cross Slide Travel | 235 mm |
| Top slide Travel | 125 mm |
| Swing over bed | 425 mm |
| Tail Stock Spindle Dia | 50 mm |
| Swing over slide | 230 mm |
| Swing in Gap | 700 mm |
| Admit between Centers | 500 mm |
| Width of Bed | 275 mm |
| Hole through the spindle | 80 mm |
| Toper bore in spindle | M.T. - 6 |
| Lead Screw Diameter | 38 mm |
| Compound Slide Swivelling Degree | 45 - 0 - 45 |
We are providing Medium Duty Lathe Machine to our clients.
Other Details-
- The bed is made from cast iron of good hardness, strictly inspected with micro level, hardness tester, and straight edge.
- Boring of the headstock is done on WMW boring machine fitted with induction hardened and ground spindle made from alloy steel.
- The apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
- Hexagonal shaped tailstock with hardened and ground tailstock spindle made from alloy steel having external and internal grinding.
- Change gear set (Inch mm)
- Chuck Plate
- Tool Post Key
- Centre Adaptor
- Dead Centre (2 Nos.)
- V - Belt set or Flat Nylon Belt
- Motor Pulley
- Four Position Tool Post
Extra Accessories-
- Electric Motor V - Belt with Electricals
- Coolant pump, tank, and nozzle
- Quick change tool Post / Rear tool post
- Taper Turning Attachment
- Reverse - Forward Switch
- Steady Rest
- Follow Rest
- Face Plate
Callback
14 Feet Extra Heavy Duty Lathe Machine, 100 mm
Product Details:
| Bed Length | 14 Feet |
| Height of Centre | 600 mm |
| Swing Over Bed | 1200 mm |
| Spindle Bore | 100 mm |
| Distance Between Centre | 2100 mm |
| Bed Width | 650 mm |
| Swing Over Cross Slide | 850 mm |
| Maximum Swing in Gap | 1500 mm |
| Spindle Speed Range | 15-300 RPM |
| Lead Screw Diameter | 50 mm |
| Cross Slide Travel | 600 mm |
| Main Motor | 10 HP |
| Country of Origin | Made in India |
| Tail Stock Spindle Diameter | 76.2 mm |
| Tail Stock Spindle Taper Bore | MT-6 |
| Tail Stock Spindle Travel | 250 mm |
| Lead Screw Pitch | 2 T.P.I |
We are the leading manufacturer of Accumax Extra Heavy Duty Lathe Machine. which are available in different specifications and dimensions. These lathe machines are used in different industries and can also be customized as customer requirement.
Standard Accessories:
- Chuck Plate
- Motor Pulley
- Tool Post Key
- Dead Centers -2 Nos.
- Center Adopter
- Change Gear - B.S.W-13
- Change Gear - M.M.-3
Callback
12 Feet Extra Heavy Duty Lathe Machine, 100 mm
Product Details:
| Bed Length | 12 Feet |
| Height of Centre | 600 mm |
| Swing Over Bed | 1200 mm |
| Spindle Bore | 100 mm |
| Distance Between Centre | 1500 mm |
| Bed Width | 325 mm |
| Swing Over Cross Slide | 850 mm |
| Maximum Swing in Gap | 1500 mm |
| Spindle Speed Range | 20-400 RPM |
| Cross Slide Travel | 600 mm |
| Condition | New |
| Country of Origin | Made in India |
| Tail Stock Spindle Diameter | 100 mm |
| Tail Stock Spindle Taper Bore | MT-6 |
| Tail Stock Spindle Travel | 300 mm |
We are the leading manufacturer of Extra Heavy Duty Lathe Machines. which are available in different specifications and dimensions. These lathe machines are used in different industries and can also be customized as customer requirement.
Standard Accessories-
- Chuck Plate
- Motor Pulley
- Tool Post Key
- Dead Centers -2 Nos.
- Center Adopter
- Change Gear - B.S.W-13
- Change Gear - M.M.-3
Callback
All Geared Light Duty Lathe Machines
Product Details:
| Brand | Accumax |
| Automatic Grade | Semi-Automatic |
| Model | tagl-4 |
| Height of centers | 165 mm |
| Swing over bed | 330 mm |
| Swing over side | 170 mm |
| Width of bed | 240 mm |
| Spindle bore | mm |
| Spindle nose | A2-4 |
| Speed | 60-1025 rpm |
| Cross slide travel | 175 mm |
| Top slide section | 125 mm |
| Tail stock sleeve | MT-3 |
| Tool shank section | 20 x 20 mm |
| Feeds Longitudinal | No. 60/0.08-1 |
| Feed Transverse | No. 60/0.02-0.25 |
| Metric thread | 40/0.4-7 mm |
| Thread per inch | 45/70-4 TPI |
| Lead screw | 4 TPI |
| Main motor | 1.5 kw |
| Admit between center | 600 mm |
| Bed length feet | 4.5' |
Cutting and finishing are two important operations done for the finishing touch of any designing work and All Geared Lathe Machine is the finest instrument to do both. We are manufacturing high-quality machines of different capacity range and that is according to customer point of view. In the next, we are amplifying the specifications making the product unique and special.
Other Details
| Model | tagl-5 | tagl-6 | |
| Capacity | |||
| Height of center | 190 mm | 190 mm | |
| Swing over bed | 380 mm | 380 mm | |
| Swing over cross slide | 250 mm | 250 mm | |
| Swing in gap | 560 mm | 560 mm | |
| Admit between center | 775 mm | 1000 mm | |
| Movement of cross slide | |||
| Movement of compound slide | |||
| Bed type | |||
| Bed length | 1600 mm (ft. 5''. 3") | 1828 mm (ft. 6'') | |
| Bed width | 240 mm | 240 mm | |
| Gap length | 125 mm | 125 mm | |
| Head stock | |||
| Hole through the spindle | |||
| Spindle nose | loo type | loo type | |
| Range of spindle speed | 45 to 1000 rpm | 45 to 1000 rpm | |
| No. Of spindle speed | 8 | 8 | |
| Tail stock | |||
| Quill Dia. | 38 mm | 38 mm | |
| Taper in quill | mt-3 | mt-3 | |
| Quill travel | 125 mm | 125 mm | |
| Electricals | |||
| Motor power | 1. 5 kw/ 2 h. P. | 1. 5 kw/ 2 h. P. | |
Callback
7 Feet Heavy Duty All Geared Lathe Machine, 50 mm
Product Details:
| Bed Length | 7 Feet |
| Height of Centre | 254 mm |
| Swing Over Bed | 450 mm |
| Spindle Bore | 50 mm |
| Number of Spindle Speeds | 8 |
| Machine Type | All Geared Heavy Duty Lathe Machine |
| Distance Between Centre | 1000 mm |
| Bed Width | 325 mm |
| Swing Over Cross Slide | 280 mm |
| Maximum Swing in Gap | 760 mm |
| Spindle Speed Range | 30-500 RPM |
| Cross Slide Dimension | 200 x 500 mm |
| Cross Slide Travel | 280 mm |
| Main Motor | 2 HP |
| Condition | New |
| Machine Weight | 1300 kg |
| Country of Origin | Made in India |
| Tail Stock Spindle Diameter | 60 mm |
| Tail Stock Spindle Taper Bore | MT-4 |
| Tail Stock Spindle Travel | 150 mm |
| Range of Inch Thread | 4-28 T.P.I |
| Range of Metric Thread | 1-7 mm |
| Spindle Nose | 6 T.P.I |
| Taper in Spindle Sleeve | MT-6 |
Heavy Duty Lathe Machines are one of the most extensively utilised lathe machines because of its high quality and rapid rate of output. These are made of high-quality iron and steel and are built to withstand the most difficult shaping chores. It is used in a variety of industries, including power plants, steel plants, oil and mining industries, shipbuilding factories, repair shops, and paper textiles, for metal spinning, metal working, wood turning, and metal fabricating. They are particularly well suited to high-volume production because to their high-performance capacity to work at fast speeds.
We offer the precision engineered range of Heavy Duty Lathe Machines. These heavy-duty lathes are manufactured from highest grades of material like iron and steel and are available in customized specifications for our client's benefit.
Features:
- High tensile strength
- Dimensionally accurate
- Corrosive resistant
- Abrasion-resistant
Callback
12 Feet Extra Heavy Duty All Geared Lathe Machine, 100 mm
Product Details:
| Bed Length | 12 Feet |
| Height of Centre | 600 mm |
| Swing Over Bed | 1200 mm |
| Spindle Bore | 100 mm |
| Machine Type | All Geared Extra Heavy Duty Lathe Machine |
| Applicable Industry | Shipbuilding, Oil Industry, Power Plant, Gas Industry |
| Bed Width | 650 mm |
| Distance Between Centre | 2100 mm |
| Swing Over Cross Slide | 850 mm |
| Maximum Swing in Gap | 1500 mm |
| Cross Slide Travel | 600 mm |
| Spindle Speed Range | 15-300 RPM |
| Country of Origin | Made in India |
| Tail Stock Spindle Diameter | 76.2 mm |
Extra heavy duty lathe machines are more efficient and perform better than other lathe machines. The swing of the bed on these machines varies from 630mm to 1600mm, depending on the type. Because of these characteristics, it has a wide range of applications in a variety of industries, including shipbuilding, iron and steel plants, paper manufacturing, and so on.
Our range of Extra Heavy Duty All Geared Lathe Machine is manufactured from quality tested raw material. The main spindle runs on precision taper roller bearing. The gears are in headstock made from en-353 and hardened ground & cut on the imported machine. We also meet customized requirement for our client's benefit.
Callback
Manual Lathe
Product Details:
| Automation Grade | Manual |
| Lathe Machine Type | Horizontal Lathe |
| Phase | Three |
| Usage/Application | Lathe Job work |
| Power Source | Electric |
we are leading manufacturer and supplier of manual lathe in rajkot,gujarat.
Callback
